Delrin, Reinforced Plastic and Scratch Resistant Surface

	Home \| Community \| Contact \| Inquiries \| Slideshows \| Submit Artwork \| Index
	Ph: (757) 622-9281 Toll Free: 1(800) 826-0758

Delrin®

The stiffest and highest design strength non reinforced plastic. It has a hard, scratch resistant surface, low friction, excellent resistance to hydrocarbons and high fatigue endurance. Machines like brass.

Primary Applications

• Gears

• Bearings

• Bushings

• Pulleys

• Slide Plates

• Wear Surfaces

• Chain Guides

• Timing Screws

Grades Available

• 150E - Low porosity	• 550SA - Best machinability DELRIN®
• 150SA - Best impact	• AF Glass filled DELRIN® - good mechanical strength

Chemical Resistance - top

• Halogenated hydrocarbons-excellent (fuels, oil, grease)

• Polar Fluids - good to poor (acids, chlorinated water)

Physical Properties

Service Temperature: 195°F

Coefficient of Friction: Static - 0.20/Dynamic - 0.35

Other Physical Properties - top

• High Strength Stiffness

• Low wear

• Excellent dimensional stability

• Contains TEFLON® fibers for lubricity


Acrylics Krinkglas, Acrylite FF Acrylite GP, Acrylite Plus Acrylite AR Acrylite Rod Acrylite Sheet Acrylite Tubing	Marine and Signage Polycarve, Woodgrain Panel Burl Plastic Panel Stone and Marble Hi-Tech Color Cores	PVC Type 1 CPVC Vintec Celtec Komacel Celtec Expanded Celtec 700	Nylon Nylon, Cast Nylon
Polyethylene Low Density, High Density, Cutting Board, Seaboard	Kydex General Info, Available Grades	PVC Vinyl Strip	Adhesives
Phenolic Fabrication Info, Phenolic Selection Chart, Canvas C-CE, G10-FR4, G11-FR5, GPO-1, GPO-3, Paper X-XX-XXX, Linen L-LE, G5-G9, G7, Counter plate Laminate, Static Dissipate Laminate, Ballistic-Resistant Laminate		Additional Products Corian, Delrin, Polypropylene, Teflon, UHMW, Hydlar, ABS, Starboard, Flexible Tubing, Coraplast, Kytec, LUMAsite, Machinable Boards, Lexan Life Safety Products, Sentinel Event Reduction Doors

Norva Plastics, Inc. • 3911 Killam Ave., Norfolk, Virginia 23508
Toll Free: 1(800) 826-0758 • Ph: (757) 622-9281 • Fax: (757) 623-2859 • Email: